意外油火成為 Dreame PM20 Smart Air Purifier 的理想壓力測試
An Accidental Grease Fire Made the Perfect Stress Test for Dreame’s Smart Air Purifier
CNET 測試 Dreame PM20 Smart Air Purifier,發現它能迅速改善意外油火後的廚房空氣。火災後 PM2.5 和 PM10 均升至 999 µg/m³;運行 1 小時後,PM 指標降至 50 以下,4 小時後各項 PM 指標均為 2。機身數據亦大致吻合第三方空氣質素監測器。
I live on the shores of Lake Ontario in Western New York, an area that’s recently been heavily affected by smoke from the Canadian wildfires. Given that, I thought it was an ideal time to test a premium air purifier to see how effective it is at handling heavy particle loads over time.
The model I tested was the PM20 Smart Air Purifier from Dreame, which is a three-in-one air purifier, fan and heater that includes several built-in air-quality monitors. That said, I didn’t want to just trust the device itself to measure its own performance, so I also deployed a high-end, third-party air quality monitor to double-check its reporting.
While it doesn’t quite match the comprehensive testing from CNET’s lab team in Louisville, Kentucky, which we use to build our list of the year’s best air purifiers, it still helped me see the air purifier’s impact in real time, especially when an accidental grease fire occurred.
For my test, I used a 16-in-one indoor air quality monitor that tracks, among other metrics, PM1.0, PM2.5, PM10, CO2, TVOC, HCHO, temperature and humidity.
Best Air Purifiers of 2026
I started by taking baseline readings in rooms all over the house. I then ran the Dreame PM20 in each room for 2 to 3 hours and took a second reading to see how the purifier affected air quality. After the second reading, I let the PM20 do its thing for another 6 to 8 hours before taking a final reading. I compared my baseline readings to those from the included Dreamehome app, which displays PM1.0 (particles 1 micron or smaller), PM2.5 (2.5 microns or smaller), PM10 (10 microns or smaller), CO2 (carbon dioxide), HCHO (formaldehyde) and TVOC (total volatile organic compounds) levels, as well as a general indicator of air quality, temperature and humidity.
For some additional “stress testing,” I also planned to fry a heavy meal in the kitchen, including bacon, which I was going to blacken to produce smoke. But I ended up getting a much more involved test than I initially planned when I left an oiled pan on the stovetop and got distracted by chores. By the time I realized it, I came back to a raging oil fire in the pan and a kitchen obscured by roiling clouds of black smoke. On the upside, there was no lasting damage (other than a ruined frying pan), and I got a much more intense stress test than I planned.
I ended up with an initial reading for the kitchen before the fire and a startling one immediately after I extinguished the fire. I ran the PM20 for an hour, checked again and then a final time, 4 hours later.
The results
Overall, I was very impressed with the PM20. Surprisingly, the house’s indoor air quality wasn’t as badly affected by the wildfire smoke as I expected, but the purifier nonetheless did a great job of cleaning the air and keeping it highly purified in every room I tested. The internal air quality reporting from the machine itself also tended to align pretty closely with what I was seeing on the third-party AQM.
More impressively, the PM20 did a remarkable job of cleaning up the kitchen air after what was genuinely a very nasty oil fire.
The kitchen fire
Before my disastrous experiment, the air quality in the kitchen was actually quite good. That said, after I’d managed to put out the oil fire, the smoke was so heavy that I had to leave not just the kitchen but the entire house, and spent several minutes coughing when I got outside. It was reflected in the AQM readings below, which showed alarming, maxed-out 999 µg/m³ (micrograms per cubic meter) for both PM2.5 and PM10, and high readings for PM1 and CO2 as well.
But with just an hour of the PM20 running to help clear the smoke, PM readings had already dropped below 50, and TVOC, HCHO and CO2 readings were down significantly as well. After 4 hours, the overall air quality was generally outstanding. I saw PM level 2s across the board, with all other indicators also in the Goldilocks zone.

The real-world difference was also incredible. The air went from unbreathable and toxic to fresh and light, to the point that an uninformed guest would never know a fire had taken place just a handful of hours earlier.
The Dreame app largely synced with the readings from my independent air quality monitor, especially for PM levels, where both showed uniform 2s. The other readings weren’t identical, but close enough to be well within the margin of error (note that the Dream app reports TVOC in µg/m³ (micrograms per cubic meter) while the AQM uses mg/m³ (milligrams per cubic meter).
The spare room
I also tested the PM20 under more normal conditions in my spare room, where the air quality often takes a hit because it’s where one of my cat’s litter boxes lives, as well as a large 3D printer and other things. While it’s nowhere near kitchen-fire levels, the initial readings showed slightly elevated PMs. The PM20 went to work quickly and, after 2 hours, had reduced each PM level to a mere 4.
And then, 8 hours later, all the levels remained in the low single digits, with similarly excellent TVOC and HCHO readings.

The air quality data in the Dreame app, drawn directly from the air purifier, synced up closely with the AQM again.
The bedrooms
I finally ran the PM20 through its paces in two separate bedrooms, though the results were relatively underwhelming by comparison, mostly because both rooms already had excellent air quality. Bedroom one started with 2s across the board for PM levels, and bedroom two with 4s. Unsurprisingly, both showed little variation in my later tests, at the 2- to 3-hour and 8-hour marks.
However, the bedrooms showed that, once again, the Dreame app matched the AQM’s reporting fairly closely.

How the Dreame PM20 works
The Dreame PM20 has a combination of automatic air-quality sensing, airflow that tracks people’s positions, remote app control and built-in voice commands as well as three modes: auto, comfort and pet, which provide different balances of automatic purification, quiet operation and stronger airflow.
Auto mode automatically adjusts fan speed based on detected air pollution. Pet mode boosts airflow to help capture airborne pet hair and dander and reduce odors, while comfort mode reduces fan noise and lighting for quieter, less distracting operation. It also has a “Dualflow” design that distributes purified air forward and upward, rather than pushing air through a single fixed outlet.

It relies on a four-stage filtration system. Inside is a housing that screens out large debris and hair, alongside a H13-grade high-efficiency composite filter for fine particles, a carbon layer for odors and volatile gases, and a formaldehyde-catalytic filter.
The “AI-powered Airflow that Follows You” feature is about directing the breeze toward people in the room to cool while purifying the air. Dreame’s Enviro Detect technology detects and tracks a person’s position, and then the motorized head swivels to aim purified airflow toward them as they move around. In practice it’s more of a novelty than a genuinely useful feature, particularly with multiple people in a space (at which point it just sweeps an area distributing airflow), though it works reasonably well for a single person.
The PM20 has a built-in voice assistant that responds to “OK, Dreame,” and lets you turn on the purifier and issue other specific commands without reaching for your phone or dealing with the remote, which I found to be fairly unresponsive at times. On the upside, there’s no need for an internet connection to use voice commands, though when the fan was running at max settings you really have to raise your voice for the unit to acknowledge you.
Final takeaways
I was impressed with the PM20’s overall performance, especially how it handled the aftermath of the kitchen fire. It not only did a great job of cleaning up heavily smoke-polluted air, but it also provided generally accurate self-reporting. After my tests, I’d be comfortable relying solely on the information provided in the app to gauge air quality, whether the purifier was running or not.
While it’s not inexpensive, retailing around $670 full price, if you live in an area with generally low air quality, like a major urban center or somewhere frequently affected by wildfire smoke or other particulate pollutants, it’s a great investment for the health of your home (and your lungs).
Overall, the PM20 is an excellent, and fully featured air purifier, though it also comes with an incredibly steep price tag, retailing for $670 as of this writing. However, for households with multiple pets or in areas that frequently suffer from poor air quality, it justifies that price tag with its excellent purifying capabilities and broad, AI-powered feature set. If those advanced features aren’t a big priority for you, on the other hand, a less expensive unit may be a better fit.
Alan Bradley
CNET Contributor
Alan Bradley is an experienced commerce, tech and culture writer with more than 20 years covering consumer electronics, popular and emerging technology, and small business solutions. He has served as commerce director and in senior editorial roles at major publications. He has also provided buying advice to major corporations and small businesses as an independent consultant. His work has appeared in Rolling Stone, U.S. News & World Report, PCMag, TechRadar, PC Gamer, GamesRadar+, Android Police, Gamasutra, Live Science, Variety, and other outlets. He served as the Director of Commerce for Lifewire at Dotdash Meredith and was a Senior Editor at Future Publishing on the Central Hardware Team. He was also a contributor to the Lockport Union Sun and Journal. Alan is also a novelist. His debut novel is The Sixth Borough. See full bio
The Latest from Alan
來源:CNET · cnet.com