跳到正文
DEV Community· Mingchun Huang·· 1 天前AI 評分19

機械人末端執行器安裝座:陽極氧化後收緊的定位孔

End effector mounts and the hole that moved after anodizing

AI 導讀

陽極氧化會增加孔內塗層厚度,令機械人末端執行器安裝座的定位銷孔收緊,工具板因而無法裝入。CHX Precision Metal 現按陽極氧化後的尺寸加工定位銷孔,並按不同特徵選擇遮蔽或預留尺寸;深孔內的塗層增厚並非完全均勻。買家應確認加工廠按表面處理前或後的尺寸加工;其深圳業務可按圖紙提供 +/-0.005 mm 公差。

正文

Mingchun Huang

A customer ordered robot end effector mounts with four dowel holes that located a tool plate. The holes were perfect out of the machine. After anodizing, two of them were tight enough that the plate would not drop in. We had machined to the blank dimension and forgotten what the coating would do.

Anodizing does not just add colour. On a bore it adds thickness, and on a close-fit dowel hole that thickness is not negligible. We had treated the coating as decoration applied after the real work was done. On these mounts the coating was part of the final dimension.

Machine to the finish, not to the blank

We changed the process so the dowel holes are finished to the post-anodize size, with the coating growth accounted for. On some features that means masking; on others it means cutting slightly oversize and letting the coating come to nominal. Which one works depends on the feature and the coating thickness, and we had to learn it feature by feature.

I still get this wrong on unusual geometries. Anodizing growth is not perfectly uniform inside a deep hole. But on the standard mounts we now have a repeatable answer, which we did not have when that first batch came back.

Finish is a process step, not an afterthought

The mistake was mental: I had separated machining from finishing in my head. For a lot of parts that separation is harmless. For a precision mount with dowel locations it is the whole game. The last operation the customer sees is the one that decides whether the part fits, and it is not always the one with a cutter in it.

What we tell buyers now

If your part has tight mating features and a coating, ask the shop whether they machine to the pre- or post-finish dimension. That question catches a surprising number of problems before they become a returned batch.

We machine robot end effector mounts and automation parts in Shenzhen, with tolerances down to +/-0.005 mm where the drawing calls for it. More on our robot end effector mount machining.

CHX Precision Metal — precision CNC machining in Shajing, Bao'an, Shenzhen. MOQ 1 piece, prototypes 3-7 working days, batch production 7-15 days, EXW Shenzhen.

來源:DEV Community · dev.to